Make sure the ignition is switched off and the headlight switch is off. The symbol below, located on some parts of the vehicle, indicates that this manual contains information related to the part. If you are unsure about any servicing or maintenance procedure, have it done by an Authorized Mazda Dealer. Conditioner Operate the air conditioner in cool or cold qWindshield Defrosting and Defogging weather to help defog the windshield and 1. Place the child-restraint system on the over or against the side window of a seat without putting your weight on the vehicle with side and curtain air bags: seat and fasten the seat belt. We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure and in your full satisfaction with your Mazda product. When prompt washing with improper washing.
Turn the screw counterclockwise and slightly and turning it remove it, and then partially peel back counterclockwise. Do not drive with the seatback unlocked: All of the seatbacks play an important role in your protection in a vehicle. Follow the manufacturer's instructions and always keep the child-restraint system buckled down: An unsecured child-restraint system is dangerous. If you shut off the engine while the light is flashing you will not be able to restart it. If installing a front-facing child-restraint system on the front passenger seat is unavoidable, move the front passenger seat as far back as possible. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes.
The cargo weight limit can be calculated by subtracting the total weight of the vehicle occupants from the combination weight of occupants and cargo should never exceed value on the tire label. Seat belt usage is necessary to: l Keep the occupant from being thrown into an inflating air bag. Always have an Authorized Mazda Dealer inspect the front seats, front seat belt pretensioners and air bags after a collision. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. If the engine is off or if the accelerator fully.
Manual transaxle Shift into neutral. With the front air bag and the additional side air bag that comes out of the front seat, the rear seat is always a better location for children. Ø Do not drive your Mazda with any sign of engine malfunction. Insert the wing bolt into the jack with To remove the jack the jack screw pointing down and turn 1. An accident could damage the belt webbing of the seat belt in use. Use a commercially-available, non- impedance 3.
Your Mazda will perform best with fuel listed in the table. Set the mode selector dial to the side windows. Never tow a trailer with your Mazda2. The brakes and clutch draw fluid from the same reservoir. If the and securely locked: warning light illuminates, park your. A passing vehicle or a.
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment. Never touch the glass portion of a halogen bulb with your bare hands and Removal always wear eye protection when handling or working around the bulbs: When a halogen bulb breaks, it is dangerous. If the seat belt extender is left connected, the seat belt extender might get damaged as it will not retract with the rest of the seat belt and can easily fall out of the door when not in use and be damaged. In addition, the pretensioner system for the front passenger, like the front passenger air bag, is designed to only deploy in accordance with the total seated weight on the front passenger seat. Make sure the cooling fan is operating,.
Remove the tire blocks and store the nuts of the same configuration: tools and jack. Check the tire pressure label for tire size and inflation pressure. The seat belt will not fit properly. See the section on child restraint page 2-21. The front passenger's seat is clearly the worst choice for any child under 12, and with rear-facing child- restraint systems it is clearly unsafe due to air bags.
Seat your child safely in the child- restraint system and secure the child according to the instructions from the child-restraint system manufacturer. Lug wrench Jack lever Towing eyelet Flat tire belt Spare tire. Mazda 2 2014-2015 Workshop Service Repair Manual. Special care is needed control may collect on the underbody. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. If your key is lost, consult your Authorized With keyless entry system Mazda Dealer and have your code number ready. Wear the lap portion of the belt snugly and as low as possible.
Do not use an extender that is too long: Using an extender that is too long is dangerous. Odometer qOdometer, Trip Meter and Trip Meter Selector The display mode can be changed from. In a collision or sudden stop, the seat belt cannot provide adequate protection. Grasp the seat belt tongue. Up to 3 transmitters can be used with the keyless entry system per vehicle. Install the new bulb in the reverse order 5.